Matrix: How do I connect a Panasonic HCU200 CCU to an Eclipse frame MVX port?
Question: I need to connect a Panasonic HCU200 camera CCU to my Eclipse frame. Can this be done and if so what are the
pin outs from the Matrix frame to the camera CCU?
Answer: Yes this can be done, the Matrix frame 4-wire ports can be connected to the HCU200 as a 4-wire direct.
Select "4W" and either INCOM1 or INCOM2 from the rear panel switches on the HCU200 camera CCU. The chart
below will show the wiring scheme from the HCU200 to the Matrix frame MVX-A16 port.
The detailed chart for channels 1 and 2 is attached below as a PDF.
pin outs from the Matrix frame to the camera CCU?
Answer: Yes this can be done, the Matrix frame 4-wire ports can be connected to the HCU200 as a 4-wire direct.
Select "4W" and either INCOM1 or INCOM2 from the rear panel switches on the HCU200 camera CCU. The chart
below will show the wiring scheme from the HCU200 to the Matrix frame MVX-A16 port.
The detailed chart for channels 1 and 2 is attached below as a PDF.
, multiple selections available, Use left or right arrow keys to navigate selected items
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.