Wireless: Can a Tempest CP-242 beltpack with v2.10 firmware operate on a base with v3.0 or higher firmware?
In this case a v2.1.0 firmware beltpack will not operate with a main station running v3.0.0 or higher firmware. The beltpack
will need to be connected to the code updater utility and brought up to v3.0.0 in order to pair to the base to register it and
program properly.
After upgrading the beltpack to the base station it is recommended that the user clear the memory factory default the beltpack
from the tech menus to remove any remnants of v2.x.x programming before pairing the beltpack to the base station.
will need to be connected to the code updater utility and brought up to v3.0.0 in order to pair to the base to register it and
program properly.
After upgrading the beltpack to the base station it is recommended that the user clear the memory factory default the beltpack
from the tech menus to remove any remnants of v2.x.x programming before pairing the beltpack to the base station.
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.