/
Partyline: Can I set the RS-701 talk button for a "double tap latch"?
Partyline: Can I set the RS-701 talk button for a "double tap latch"?
By Administrator
Apr 06, 2019
The RS-701 is currently configured via recessed dip switch to function as a single tap latch or non-latching talk button. Double tap latch functionality is not supported.
As with other Clear-Com products the talk button if pressed and held down acts as a momentary talk, as soon as the operator releases the button the talk is no longer enabled. A quick tap enables a "latched" talk with the green talk led "on".
To enable non-latching talk functionality the user will loosen the beltclip to expose the dip switch bank, set dip switch position 6 to "OFF".
See chart below for all dip switch settings:
As with other Clear-Com products the talk button if pressed and held down acts as a momentary talk, as soon as the operator releases the button the talk is no longer enabled. A quick tap enables a "latched" talk with the green talk led "on".
To enable non-latching talk functionality the user will loosen the beltclip to expose the dip switch bank, set dip switch position 6 to "OFF".
See chart below for all dip switch settings:
, multiple selections available,
Related content
Partyline: Can I talk out on all channels of the MS-704 main station via one button push?
Partyline: Can I talk out on all channels of the MS-704 main station via one button push?
More like this
Partyline: Can the KB-702 talk switch be permanently enabled to the "On" position?
Partyline: Can the KB-702 talk switch be permanently enabled to the "On" position?
More like this
Partyline: What are the dip switch settings for the RS-701 beltpack?
Partyline: What are the dip switch settings for the RS-701 beltpack?
More like this
Partyline: How does the RS703 / RS603 call signalling work when connected to a MS702
Partyline: How does the RS703 / RS603 call signalling work when connected to a MS702
More like this
Partyline: What are the dip switch settings for the RS-702 / RS-703 series beltpacks?
Partyline: What are the dip switch settings for the RS-702 / RS-703 series beltpacks?
More like this
Partyline: Converting an RS-703 beltpack from Clear-Com to RTS operation using the dip switch on the RS-703
Partyline: Converting an RS-703 beltpack from Clear-Com to RTS operation using the dip switch on the RS-703
More like this
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.