/
Wireless: Lockout key settings for Tempest 3.0 Seamless Roaming Systems

Wireless: Lockout key settings for Tempest 3.0 Seamless Roaming Systems

All Tempest 2400 Base Stations with version 3.0 firmware and radio module version 1.18 in a roaming group must have the same Lockout Key. There are a total of 256 Lockout Keys to choose from. The Lockout Key can be any number between 0 and 255. It is the combination of Network Number + Lockout Key that uniquely identifies a Base Station radio to its corresponding beltpack radios. There is, however, no direct correlation between the Lockout Key and either the Radio Band or the Network Number, so any number may be chosen without regard to other radio parameters. The only real advice here is that it is probably best to pick a Lockout Key other than 255 as that is the default from the factory.
VERY IMPORTANT!   All Base Stations in a roaming group must have the same Lockout Key.
Note: When changing the lockout key, all beltpacks will have to be re-paired with the base station.

Related content

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT


This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..


The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.