/
Partyline: How do I take audio from the PL line and dry it out to send to a recording device?
Partyline: How do I take audio from the PL line and dry it out to send to a recording device?
By Administrator
Apr 06, 2019
Question: I want to peel off my party line audio in a way thatisolates the 30 volts so we can record the director'strack to a tape machine ? Any recommendationsand/or does Clear Com offer any isolators to do this ?
Answer: Your need is very common--- So easy to do…
If you have an unused beltpack --- take pins 3 and 4 at the headset connector -- This will provide you with an isolated audio feed and abundant level – use the volume control to find a comfortable sweet spot
No beltpack available? Grab the 4 pin connection off any remote station --- or, from your Main/Master Station - -
Better yet, purchase a TR-50 – Talent receiver --- It can be used to feed your recorder.
Why not from the microphone cable connecting Clear-Com --- Using Pins 1 & 3 --? Not recommended -- You want Isolation and you don’t want to load the Clear-Com line --- meaning your bridging impedance should be very high --- 20, 000 ohms or greater.
Answer: Your need is very common--- So easy to do…
If you have an unused beltpack --- take pins 3 and 4 at the headset connector -- This will provide you with an isolated audio feed and abundant level – use the volume control to find a comfortable sweet spot
No beltpack available? Grab the 4 pin connection off any remote station --- or, from your Main/Master Station - -
Better yet, purchase a TR-50 – Talent receiver --- It can be used to feed your recorder.
Why not from the microphone cable connecting Clear-Com --- Using Pins 1 & 3 --? Not recommended -- You want Isolation and you don’t want to load the Clear-Com line --- meaning your bridging impedance should be very high --- 20, 000 ohms or greater.
, multiple selections available,
Related content
Partyline: I want to take a dry balanced audio feed and patch it into a Clear-Com PL line, how do I accomplish this?
Partyline: I want to take a dry balanced audio feed and patch it into a Clear-Com PL line, how do I accomplish this?
More like this
Partyline: How do I connect (extended) a PL system over fibre
Partyline: How do I connect (extended) a PL system over fibre
More like this
Matrix: How can I record a Matrix party-line feed to a recording device?
Matrix: How can I record a Matrix party-line feed to a recording device?
More like this
Partyline: How do I connect a Sony CCU-M5A to a Clear-Com Partyline system?
Partyline: How do I connect a Sony CCU-M5A to a Clear-Com Partyline system?
More like this
Partyline: What is the best way to interface a Panasonic AG-HPX255 camcorder to an Encore partyline system?
Partyline: What is the best way to interface a Panasonic AG-HPX255 camcorder to an Encore partyline system?
More like this
Partyline: How to connect Clear Com PS-20 to RS-602
Partyline: How to connect Clear Com PS-20 to RS-602
More like this
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.