/
Matrix: How do I utilize fewer Power Supplies per individual CCI-22 for partylines?
Matrix: How do I utilize fewer Power Supplies per individual CCI-22 for partylines?
By Administrator
Apr 06, 2019
By using the top DB-9 of a CCI-22 backplane for power only, and using the bottom for PL distribution to Party Lines, you can use one power supply for more than one PL, since the power on pin-2 does now yet have audio added to it's XLR line.
HOWEVER, termination must be jumped on the CCI-22 card (MAKE the jumper {top, or "A"}) and OFF on the power supplies.
HOWEVER, termination must be jumped on the CCI-22 card (MAKE the jumper {top, or "A"}) and OFF on the power supplies.
, multiple selections available,
Related content
CCI-22 (2/4 wire convertor) Pin-Out
CCI-22 (2/4 wire convertor) Pin-Out
More like this
Matrix: Are the CCI-22 rear panel DB-9 connectors wired in parallel?
Matrix: Are the CCI-22 rear panel DB-9 connectors wired in parallel?
More like this
Partyline: The PK-7 partyline power supply
Partyline: The PK-7 partyline power supply
More like this
Matrix: Audio noise heard on party lines when adding CCI-22 with ECS
Matrix: Audio noise heard on party lines when adding CCI-22 with ECS
More like this
Matrix: CCI-22 interface front panel controls / indicator LEDs
Matrix: CCI-22 interface front panel controls / indicator LEDs
More like this
Matrix: How to Null the CCI-22
Matrix: How to Null the CCI-22
More like this
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.