Wireless: DX210 'ISO' button on packs not working.

Question: When I press the ISO button on my BP210 pack the ISO function does not seem to work and the BP only talks to other BPs but not to the wired comms 

Answer: Try this: With the beltpack off, hold down IC1 then press and release the PWR button, release the IC1 button after releasing the PWR button.(ISO restrict)

Power the beltpack off again. With the beltpack off, hold down ISO and IC1 buttons, press and release the PWR button, then release ISO and IC1buttons. (Release ISO restrict).

 

 

Also check that the “ISO disable” jumper (JP4) is set to OFF inside the base unit.