/
Partyline: What is the IF4W4 interface?
Partyline: What is the IF4W4 interface?
The IF4W4 4-channel four-wire interface is a modular interface that enables up to 4 four-wire communication systems (such as cameras, TELCO lines and 2-way radio) to interface with the Clear-Com intercom system. It matches standard transmit/receive lines (at normal levels) to Clear-Com Party Line level.
The IF4W4 is powered by the Clear-Com intercom line using standard two-conductor shielded MIC cable. The cable is run from the output connector of a Clear-Com main or remote station to the rear panel of the IF4W4.
Front Panel Controls:
For each channel the IF4W4 front panel contains ‘Out’ (transmit), ‘In’ (receive), ‘Null’ level controls and level indicators. For all channels a test jack and a four-pin headset XLR connector that connects to built-in test oscillators is provided to set and monitor the circuit nulling of each channel.
The ‘Link’ switches enable you to assign each of the four-wire systems to separate intercom channels, or put two, three, or all four systems on one party line.
Rear Panel:
The IF4W4 rear panel provides four three-pin XLR connectors for interfacing up to four different Clear-Com lines, as well as four terminal block connectors for four-wire input and output. The interface mounts in a standard 19 in. equipment rack and is 1RU in height.
The IF4W4 is powered by the Clear-Com intercom line using standard two-conductor shielded MIC cable. The cable is run from the output connector of a Clear-Com main or remote station to the rear panel of the IF4W4.
Front Panel Controls:
For each channel the IF4W4 front panel contains ‘Out’ (transmit), ‘In’ (receive), ‘Null’ level controls and level indicators. For all channels a test jack and a four-pin headset XLR connector that connects to built-in test oscillators is provided to set and monitor the circuit nulling of each channel.
The ‘Link’ switches enable you to assign each of the four-wire systems to separate intercom channels, or put two, three, or all four systems on one party line.
Rear Panel:
The IF4W4 rear panel provides four three-pin XLR connectors for interfacing up to four different Clear-Com lines, as well as four terminal block connectors for four-wire input and output. The interface mounts in a standard 19 in. equipment rack and is 1RU in height.
, multiple selections available,
Related content
Partyline: IF4-B-4 front panel / rear panel controls
Partyline: IF4-B-4 front panel / rear panel controls
More like this
Partyline: What adaptor / interface do I use for a 4-Wire to 2-wire interface
Partyline: What adaptor / interface do I use for a 4-Wire to 2-wire interface
More like this
Partyline: What is the pinout for the IF4W4 interface's terminal block?
Partyline: What is the pinout for the IF4W4 interface's terminal block?
More like this
Partyline: Connection of CCU Sony HCCU-100 to IF4W4 and MS702
Partyline: Connection of CCU Sony HCCU-100 to IF4W4 and MS702
More like this
Grass Valley CopperHead 3404 5-pin Intercom
Grass Valley CopperHead 3404 5-pin Intercom
More like this
Partyline: Camera CCU Interfacing to Clear-Com Party-Line
Partyline: Camera CCU Interfacing to Clear-Com Party-Line
More like this
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.