Partyline: How do I connect a Motorola CP040 handset to a TW-47 interface
At Clear-Com we are often asked about how to interface a walkie talkie to our Encore PL system.There are many walkie talkie units on the market world wide and each has a different connection method, often there is very poor information available even if the user manual for the walkie talkie is available the relevant pin out information required for the accessories connector is not available. We (Clear-Com) often have to resort to finding a good service repair center for the walkie talkie and request the pin out info
For the Motorola CP040We contactedthis company http://www.tsshropshire.co.uk/ ; Tech guy john@tsshropshire.co.uk very good knowledge
Here is theinfo needed to interface with TW-47 unit
NEW MOTOROLA CP040 pin out info
The old Motorola CP040 had the pin out swapped
For the Motorola CP040We contactedthis company http://www.tsshropshire.co.uk/ ; Tech guy john@tsshropshire.co.uk very good knowledge
Here is theinfo needed to interface with TW-47 unit
NEW MOTOROLA CP040 pin out info
The old Motorola CP040 had the pin out swapped
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.