/
Wireless: Can I operate a CellCom/Freespeak base station on a different subnet from the host PC?
Wireless: Can I operate a CellCom/Freespeak base station on a different subnet from the host PC?
- Administrator
Owned by Administrator
Apr 06, 2019
Question: We just changed over to a new PC on a different subnet (10.1.50. 101) from the base station (10.1.20.100). I'm using the CellCom Config editor to modify a configuration. I can ping the IP adress but config editor will not configure Cell Base, when I initiate a download to the base it times out. Any ideas why this is happening?
Answer: The issue is that the CellCom base is on a different subnet from that of the PC. The cellcom base has to be on the same subnet as the PC, it doesn’t have an Ethernet port with subnet / gateway configurability. Put the Cellcom base on the same subnet address and you should be able to use the config editor to talk to the CellCom base station.
Answer: The issue is that the CellCom base is on a different subnet from that of the PC. The cellcom base has to be on the same subnet as the PC, it doesn’t have an Ethernet port with subnet / gateway configurability. Put the Cellcom base on the same subnet address and you should be able to use the config editor to talk to the CellCom base station.
, multiple selections available,
Related content
Wireless: Can I set a subnet mask and gateway for a CellCom Basestation IP address?
Wireless: Can I set a subnet mask and gateway for a CellCom Basestation IP address?
More like this
Wireless: What are the pin-outs for a CAT-5 cross-over cable that connects to CellCom?
Wireless: What are the pin-outs for a CAT-5 cross-over cable that connects to CellCom?
More like this
Wireless: On FreeSpeak basestation V2.0.4 can the IP address and Subnet mask be set?
Wireless: On FreeSpeak basestation V2.0.4 can the IP address and Subnet mask be set?
More like this
Wireless: Does the CellCom config editor software support Ethernet LAN connectivity?
Wireless: Does the CellCom config editor software support Ethernet LAN connectivity?
More like this
Wireless: How to setup a Cellcom base recently returned from the factory
Wireless: How to setup a Cellcom base recently returned from the factory
More like this
Wireless: Is the CellCom Config Editor software backwards compatible with older versions of base station firmware?
Wireless: Is the CellCom Config Editor software backwards compatible with older versions of base station firmware?
More like this
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.