/
Matrix: Can a IMF-1 interface frame work with a Matrix +3 frame?

Matrix: Can a IMF-1 interface frame work with a Matrix +3 frame?

Apr 06, 2019
IMF-1 interface frames and PSU-102 power supplies were Matrix +II generation products and are not compatible with Matrix +3 frames.  The equivalent model numbers for Matrix +3 are the IMF-3 interface frame and PSU-101 power supply. 
The IMF-1 interface frame used rear panel cards that housed a db-15 connector for connections back to the Matrix +II frame and a db-9 for interfacing to the interface card. 
CCI-22s and FOR-22 front panel interface cards in IMF-1 interface frames can be used in IMF-3 frames but will need a 710538Z (current) or older 710403Z rear panel card.
RLY-8s and TEL-12 front panel interface cards used in Matrix +II interface frames cannot migrate to Matrix +3 systems and will need to be replaced with RLY-6 and TEL-14 interface cards. 
Note: Matrix+2 and Matrix+3 systems have been replaced by the Eclipse range of matrices and panels. Visit the Clear-Com web site to view the Eclipse range of matrices, panels and interfaces http://www.clearcom.com/product/digital-matrix
Looking for labels? They can now be found in the details panel on the floating action bar.

Related content

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.