Partyline: How do I setup a pair of EF-701M interfaces for fiber modems?
Question: I want to connect separate Encore party-line systems together via fiber modems. How do I setup the EF-701M interfaces to accomplish this?
Answer: The two switches on the rear panel of the EF-701M work independently of each other. Switch 1 adjusts the EF-701M’s connector settings for use with either 4-wire fiber (the OFF position) or a matrix intercom (the ON position).
Switch 2 adjusts the EF-701M’s connector intercom levels for use with either Clear-Com equipment (the OFF position) or RTS-TW equipment (the ON position). Table 1-1 summarizes the mode switch settings (see table 1-1 below).
Note: Use the DB-15 connector pin outs for the connection to the fiber modem.
EF-701M rear panel showing the position of the mode switches for Matrix / Direct and Clear-Com / TW operation.
If you want to connect Encore PL systems together then set both EF-701M units to have switch #1 OFFswitch #2 OFF
Note: Both EF-701M units will need to powered by the Partyline system they are connected to
Answer: The two switches on the rear panel of the EF-701M work independently of each other. Switch 1 adjusts the EF-701M’s connector settings for use with either 4-wire fiber (the OFF position) or a matrix intercom (the ON position).
Switch 2 adjusts the EF-701M’s connector intercom levels for use with either Clear-Com equipment (the OFF position) or RTS-TW equipment (the ON position). Table 1-1 summarizes the mode switch settings (see table 1-1 below).
Note: Use the DB-15 connector pin outs for the connection to the fiber modem.
EF-701M rear panel showing the position of the mode switches for Matrix / Direct and Clear-Com / TW operation.
If you want to connect Encore PL systems together then set both EF-701M units to have switch #1 OFFswitch #2 OFF
Note: Both EF-701M units will need to powered by the Partyline system they are connected to
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.