/
Wireless: How do I wire up a Sennheiser HMD 46-31 headset to a CEL-BP?

Wireless: How do I wire up a Sennheiser HMD 46-31 headset to a CEL-BP?

Apr 06, 2019

The Sennheiser HMD-46-31 headset is shipped with a pig tailed cable, the user is responsible for wiring the headset to a specific connector. This is a dynamic headset with a balanced output. Tie the MIC low to MIC ground in this case which results in an unbalanced MIC output which is the default setting for the CEL-BP beltpack. 
In the case of the CEL-BP which has a 4-pin XLR connector scheme wire the headset cable to a 4-pin XLR-F connector as shown below:












CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.