Matrix: Is it possible to disable the headset detect on the V-series panel

Question- Would it be possible to use a V-series panel with a CC-95 connected for the listening, and at the same time use the gooseneck microphone for talking?


Answer - Yes you can disable the auto-headset detect function. There are dip switches inside the panel 
HEADSET AUTO DETECT : V-Series panels can auto detect when a headset is plugged in and automatically enable them. Headset auto detect can be set to enabled or disabled via a DIP switch (SW2) on the main board. As headset insertion can cause a noise on the panel some users may wish to disable automatic headset detect and use the front panel button instead to enable and disable the headsets. To access the DIP switch the rear cover must be removed from the panel. The DIP switch is located on the righthand edge of the main PCB (looking from the rear) behind the headset connector
On =auto-switch h/set mode detect enabled

OFF=auto-switch h/set mode detect DISABLED

 

 

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT


This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.