/
Wireless: What are the pin-outs for a CAT-5 cross-over cable that connects to CellCom?

Wireless: What are the pin-outs for a CAT-5 cross-over cable that connects to CellCom?

To use the CellCom or Freespeak configuration editor software in Ethernet mode directly from a PC connected to the CellCom base station a standard CAT-5 computer cross-over cable must be used.  See wiring for the cross-over cable below:



















An alternative to this connection scheme would be to use two standard CAT-5 cables and a Ethernet switch or hub to make the connections between the host PC and the CellCom base station.

Related content

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT


This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..


The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.