/
Wireless: Is the Tempest wireless intercom systems easy and intuitive to setup and use.

Wireless: Is the Tempest wireless intercom systems easy and intuitive to setup and use.

Apr 06, 2019

System setup is straight forward and typically requires less than 15 minutes to be up and running. Any end user that is familiar with existing 2-wire partly-line beltpack operation can be using a Tempest beltpack in just seconds.
Setting up a Tempest system is very easy a) Pair the beltpacks to the basestation (less than 5 seconds per beltpack) b) Select which mode each channel is going to be used for 2wire or 4wire modec) Connect your external system to the Tempest basestation d) Start using the system 
In less than 15 minutes you are up and running

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.