/
Wireless: CellCom/FreeSpeak Beltpack defaults set in the Config tool

Wireless: CellCom/FreeSpeak Beltpack defaults set in the Config tool

Apr 06, 2019
Translate page

In the V2.0 config editor toolkit software you can read and write the beltpack default settings from the individual beltpack when the belt pack is connected to the PC running the config tool via the beltpack (registration) serial cable.
When the beltpack is connected the config tool will only read the default settings and not the current settings of the beltpack. Then when the user writes the default settings back to the beltpack the beltpack will reboot after the settings have been sent and when the reboot is complete the default setting and the actual settings in the beltpack will be set to those defined in the config tool.

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.