/
Wireless: Can the FSII-Splitter support CAT-5 and Fiber connections via dip switch settings?
Wireless: Can the FSII-Splitter support CAT-5 and Fiber connections via dip switch settings?
By Administrator
Apr 06, 2019
The new FSII-Splitter can support both CAT-5 and Fiber connections.
Fiber Modules are available for single mode Fiber cable (HLI-SMFO) and multi-mode Fiber cable (HLI-MMFO)
• Modules are supplied as a pair, one for the Base Station and one for the splitter.
• The Base Station can be switched between Fiber and RJ45 mode using the CCM web browser or by base station front panel display menus.
• Modules can be hot patched, no need to power off devices.
Note: When using the splitter with third party routing devices, antenna synchronisation data is not passed. In this case, you need to
set the splitter to 'local synch' mode.
Fiber Modules are available for single mode Fiber cable (HLI-SMFO) and multi-mode Fiber cable (HLI-MMFO)
• Modules are supplied as a pair, one for the Base Station and one for the splitter.
• The Base Station can be switched between Fiber and RJ45 mode using the CCM web browser or by base station front panel display menus.
• Modules can be hot patched, no need to power off devices.
Note: When using the splitter with third party routing devices, antenna synchronisation data is not passed. In this case, you need to
set the splitter to 'local synch' mode.
, multiple selections available,
Related content
Wireless: What type of SFP does the new FSII-SPL (splitter use)
Wireless: What type of SFP does the new FSII-SPL (splitter use)
More like this
WIRELESS: SFP For Single Fibre Cable on FSII-BASE-II to FSII-SPL
WIRELESS: SFP For Single Fibre Cable on FSII-BASE-II to FSII-SPL
More like this
Wireless: Can I use RTS BP325 with FSII BASE II?
Wireless: Can I use RTS BP325 with FSII BASE II?
More like this
Matrix: Can I swap the fiber transceiver (SFP) on a E-MADI card from multi mode to Single mode
Matrix: Can I swap the fiber transceiver (SFP) on a E-MADI card from multi mode to Single mode
More like this
Matrix: Can I run FSII E1 antennas and FSII IPT (19) on the same system
Matrix: Can I run FSII E1 antennas and FSII IPT (19) on the same system
More like this
Wireless: How much current is available on the 2-wire IC ports on the FSII baseII?
Wireless: How much current is available on the 2-wire IC ports on the FSII baseII?
More like this
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.