/
Wireless IFB: How do I adjust the block 25 frequencies on my PRC-2 receiver?
Wireless IFB: How do I adjust the block 25 frequencies on my PRC-2 receiver?
- Administrator
Owned by Administrator
Apr 06, 2019
The PRC-2 receiver on block 25 is capable of being tuned from 640.000Mhz to 665.500Mhz in 100Khz increments using the two rotary switches recessed under the slide door cover on the side of the receiver. See the picture below for the location of the two rotary switches.
The left hand rotary switch adjusts frequences in 1.6Mhz increments, the right hand switch adjusts frequencies in 100Khz increments. The switches are both labeled from 0 to F, using the attached chart below the user can manually adjust the frequency of a block 25 receiver to match the frequency of a block 25 PTX-2 or PTX-3 IFB transmitter.
The left hand rotary switch adjusts frequences in 1.6Mhz increments, the right hand switch adjusts frequencies in 100Khz increments. The switches are both labeled from 0 to F, using the attached chart below the user can manually adjust the frequency of a block 25 receiver to match the frequency of a block 25 PTX-2 or PTX-3 IFB transmitter.
Related content
Wireless IFB: How do I adjust the block 24 frequencies on my PRC-2 receiver?
Wireless IFB: How do I adjust the block 24 frequencies on my PRC-2 receiver?
More like this
Wireless IFB: How do I adjust the block 26 frequencies on my PRC-2 receiver?
Wireless IFB: How do I adjust the block 26 frequencies on my PRC-2 receiver?
More like this
How to set the switches to select frequency that the PRC-2 receives
How to set the switches to select frequency that the PRC-2 receives
More like this
Wireless: Does the PRC-2 receiver allow both manual and auto frequency programming?
Wireless: Does the PRC-2 receiver allow both manual and auto frequency programming?
More like this
Wireless: How do get a PRC-2 receiver to start up on the same frequency every time?
Wireless: How do get a PRC-2 receiver to start up on the same frequency every time?
More like this
Wireless: How do I erase the 5 channel memories on a PRC-2 IFB receiver?
Wireless: How do I erase the 5 channel memories on a PRC-2 IFB receiver?
More like this
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.