Wireless: Can I use TDesk with the USB cable or only Ethernet CAT-5?
Question: Can I use TDesk software with the supplied USB cable and or the Ethernet CAT-5 cable?
Answer: TDesk programming software for Tempest 2ch and 4ch systems can only be used with a PC that supports TBase 10/100 ethernet via standard CAT-5 via a switch or direct connection with a CAT-5 ethernet crossover cable.
The supplied USB cable is only used to support firmware upgrades to the base station PIC and DSP firmware.
TDesk currently only supports online programming with the base station. No off-line programming is allowed. Configurations can be saved and introduced to an online system.
Answer: TDesk programming software for Tempest 2ch and 4ch systems can only be used with a PC that supports TBase 10/100 ethernet via standard CAT-5 via a switch or direct connection with a CAT-5 ethernet crossover cable.
The supplied USB cable is only used to support firmware upgrades to the base station PIC and DSP firmware.
TDesk currently only supports online programming with the base station. No off-line programming is allowed. Configurations can be saved and introduced to an online system.
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.