Matrix: What is the Reply key Signalization tick box for PLs used for? in EHX v7.0
The Reply key signalization for Partylines in Eclipse ECS/ EHX systems allows a operator to reply back to PL using the reply key .
The “Prevent reply keysignalization” setting works similar to the same setting on directs or interfacesand is present since EHX v7.0.
It only has an effect if “In-use tally” is ticked forthe same partyline (for the directs it’s “audio presence tally”)
So if “prevent reply key signalization” is set toFALSE and “in-use tally” is set to TRUE, and your panel has a Talk & Listen key for the PL, When the PL goes in-use (another panel or interface talks to the PL) - the talk key(s) tothe PL will start to flash (bright, 4Hz, for however long you have set this foryour panel) & the label for the PL shows up on your reply key in the same way a panel that istalking to you directly would.
Reasons for this feature are:a) You have a highlyvisible indication letting you know where audio is coming from, good for brightwork environments or stressful situations where multiple sources talk at once
b) It flashes for anadditional 10 seconds (default setting) after the transmission has finished,good for those short messages where you didn’t have a chance to see who wastalking to you because you have been intensely staring at a screen or mixingdesk
c) Should the PL thatyou are listening to be on some shift page you are not currently on, you cannow have some visibility and a chance to reply without having to swap back tothat shift page.
The “Prevent reply keysignalization” setting works similar to the same setting on directs or interfacesand is present since EHX v7.0.
It only has an effect if “In-use tally” is ticked forthe same partyline (for the directs it’s “audio presence tally”)
So if “prevent reply key signalization” is set toFALSE and “in-use tally” is set to TRUE, and your panel has a Talk & Listen key for the PL, When the PL goes in-use (another panel or interface talks to the PL) - the talk key(s) tothe PL will start to flash (bright, 4Hz, for however long you have set this foryour panel) & the label for the PL shows up on your reply key in the same way a panel that istalking to you directly would.
Reasons for this feature are:a) You have a highlyvisible indication letting you know where audio is coming from, good for brightwork environments or stressful situations where multiple sources talk at once
b) It flashes for anadditional 10 seconds (default setting) after the transmission has finished,good for those short messages where you didn’t have a chance to see who wastalking to you because you have been intensely staring at a screen or mixingdesk
c) Should the PL thatyou are listening to be on some shift page you are not currently on, you cannow have some visibility and a chance to reply without having to swap back tothat shift page.
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.