/
Wireless: Interfacing a 2 channelTempest base to 2 channel RTS PL system

Wireless: Interfacing a 2 channelTempest base to 2 channel RTS PL system

Apr 06, 2019

Steps to Configure a 2-Wire RTS 2 channel Party-line Intercom Connection to Tempest 2 channel base station
Tempest Front panel
• Adjust the Intercom Type Slide Switch to appropriate manufacturer compatible setting - RTS
• Select 2-Wire connection for the appropriate channels.
Cabling
• Make the 3-pin XLR physical connections to the Tempest BaseStation and the 2-Wire system.
Null the system
• Null the system.
• Adjust IN/OUT volume levels between the Tempest Wireless System and the 2-Wire system.
Note for 2-Wire RTS Users:
RTS TW (2-Wire) systems support two intercom channels on a single XLR cable. When connecting an RTS TW system to the Tempest basestation only one cable is required for two intercom channels. When set to RTS mode both of the 3-PIN XLR connectors (2 male and 2 female) for channels A&B are paralleled together. RTS intercom channel 1 is placed on Tempest intercom channel A and RTS channel 2 is place on channel B.

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.