/
Partyline: Can I control the source/destination programming of an RCS-2700 via a PC and RCU-67 remote programmer at the same time?

Partyline: Can I control the source/destination programming of an RCS-2700 via a PC and RCU-67 remote programmer at the same time?

Apr 06, 2019

Question:  I'm setting up an RCS-2700 source/destination assignment panel and want to know if both the serial comm port and remote RCU-67 CAT-5 port can be online at the same time for programming the RCS unit?
Answer:  An RCU-67 Remote Control Unit can be plugged into the front-panel jack to provide additional programming capability. The RCU-67 connects to the RCS-2700 unit through Category-5 cable with RJ-45 connectors. The RCS-2700 unit will recognize the presence of the RCU-67 and will begin communicating with it after it has been plugged in for a few seconds.  While an RCU-67 is plugged into the front-panel jack, communication with a PC or with a rear-panel connected RCU-67 will be suspended thus rendering the RCS-WIN software into the off-line state. 

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.