Wireless: Can I disable the ISO function on an individual PRO850 beltpack?
Question: Is it possible to remove a beltpack from participating in the ISO channel on a single base station?
I have four beltpacks, two beltpacks are using the ISO feature to converse between themselves. The third beltpack is part of a different area and does not need to hear or talk on the ISO. Is it possible to remove that third beltpack from ISO buttons C and or D?
Answer: The individual beltpacks button functions are programmed from the base station front panel display. To disable the ISO functionality on a particular beltpack go to the programming menus and access the following menu options:
Config:
Beltpac > Beltpac Setup > Sec Buttons
BPSec > BP3 > Button C or Button D > ISO OFF or ISO Momentary
The base station menu display for the beltpack is shown below:
Another alternative to the front panel menu programming is to use the PRO850 software GUI programming tool to make the button adjustments as needed. See screen shot below for the programming specifics.
I have four beltpacks, two beltpacks are using the ISO feature to converse between themselves. The third beltpack is part of a different area and does not need to hear or talk on the ISO. Is it possible to remove that third beltpack from ISO buttons C and or D?
Answer: The individual beltpacks button functions are programmed from the base station front panel display. To disable the ISO functionality on a particular beltpack go to the programming menus and access the following menu options:
Config:
Beltpac > Beltpac Setup > Sec Buttons
BPSec > BP3 > Button C or Button D > ISO OFF or ISO Momentary
The base station menu display for the beltpack is shown below:
Another alternative to the front panel menu programming is to use the PRO850 software GUI programming tool to make the button adjustments as needed. See screen shot below for the programming specifics.
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.