/
Wireless: Can I connect two Tempest MasterBelt packs together

Wireless: Can I connect two Tempest MasterBelt packs together

By Administrator
Apr 06, 2019
Normally a Tempest MasterBelt  pack can register / connect up to 5 normal Tempest beltpacks to one MasterBelt unit. Therefore everyone cantalk and listen at the same time (full duplex) . This gives you 6 users in onesystem You cannot link 2 Masterbelts together, however, you could do either of these:  - You can register normal BPs on to 2 different MasterBelts and the users can manually switch from one MasterBelt to another
or
- You can set the MasterBelt in to “shared” mode and have lots ofBPs connected and listening but only 5 can talk at any one time 
for more information on the Tempest MasteBelt please visit Clear-Com web site http://www.clearcom.com/upload/download/Tempestv3.1/Tempest2400_2CH_Masterbelt_Reference_Manual-399G114.pdf
 

Related content

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.