/
Partyline: What is the wiring pin-outs for the CC-300 / CC-400 headsets to a 4-pin XLR-F connector?

Partyline: What is the wiring pin-outs for the CC-300 / CC-400 headsets to a 4-pin XLR-F connector?

By Administrator
Apr 06, 2019
Shown below are the 4-pin XLR-F connector wiring diagram for the recently released Clear-Com CC-300 and CC-400 series headsets.  Note that the wiring diagram shows the wire connections from the 4-pin XLR to a removable headset connector.  This allows for the rapid replacement of the entire headset cable assembly when the need arises for 4-pin XLR-F, 5-pin XLR male and female, 6-pin XLR male and 7-pin XLR female.
Also listed below are the impedance specifications for both models. 










Headphone
Type:  Closed-back
Driver: 40mm diameter, neodymium magnet, copper-clad aluminium wire voice coil
Frequency Response: 40Hz - 20kHz
Microphone
Element: Dynamic
Polar Pattern: Hyper-cardioid
Frequency Response: 300Hz - 20kHz
Impedance
CC-300 Headphone: 400 ohms ±30%; at 1kHz typical
CC-400 Headphone: 200 ohms ±30%; at 1kHz typical
Microphone: 200 ohms ±30%; at 1kHz typical

Related content

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.