Although it may seem strange ICS-22 wall mount panels are configured as ICS-1008 Product Code in ECS, this is not a problem of the system nor does not mean that ECS is not recognizing the panel if you use 'hardware discovery', but that is the way the system works.
To configure the ICS-22 panels in ECS:
1. The port is declared as ICS-1008 in Matrix hardware.
2. In the panel programming key configuration use the first two buttons on the left, configure the top button as listens and the lower as talks.
NOTE:  All the other buttons on the ICS-1008 Panel mimic are not programmable nor do they work

3. It is necessary to configure the listens (green keys) on the top row buttons and talks (red keys) on the bottom row of buttons, reversing the talk and listen keys will cause the panel to not properly function when connected to the programmed port.
4. Send the changes to the frame to complete the operation. 
More information can be found in the manual of ECS: 810583ZA-Eclipse ECS User Guide.pdf; p. 5-14
For a Spanish translation of this solution please refer to solution 00002437.