Wireless: Antenna passive gain reference spec (dBi)
Question: I noticed on some of the wireless brochures that antenna gain is referenced as "dBi". What does the term dBi stand for?
Answer:
dB stands for decibel, which is a way of stating numbers in respect to each other. The “I” stands for isotropic, a theoretical antenna that radiates its signal equally well in all possible directions. The term dB, by itself, has no meaning, it must have a reference. For antennas used in the Wi-Fi band, the reference is the isotropic antenna. For power levels, the reference is the milliwatt (1/1000 of a watt).
An antenna that has 3 dBi gain means that it effectively radiates twice the power put into it as compared to the isotropic antenna. A 3dB increase doubles the output while a 3dB decrease reduces the power by half. Since we live in a real world and don’t get something from nothing, the gain actually comes from compressing the pattern into a narrower area. Imagine placing a balloon on a table (representing the isotropic antenna) and then taking your hand and pressing down on the top of the balloon. The height of the balloon decreases, but the circumference increases. This is how you get gain out of an antenna. The down side is that you reduce the radiated signal above and below the main signal.
Answer:
dB stands for decibel, which is a way of stating numbers in respect to each other. The “I” stands for isotropic, a theoretical antenna that radiates its signal equally well in all possible directions. The term dB, by itself, has no meaning, it must have a reference. For antennas used in the Wi-Fi band, the reference is the isotropic antenna. For power levels, the reference is the milliwatt (1/1000 of a watt).
An antenna that has 3 dBi gain means that it effectively radiates twice the power put into it as compared to the isotropic antenna. A 3dB increase doubles the output while a 3dB decrease reduces the power by half. Since we live in a real world and don’t get something from nothing, the gain actually comes from compressing the pattern into a narrower area. Imagine placing a balloon on a table (representing the isotropic antenna) and then taking your hand and pressing down on the top of the balloon. The height of the balloon decreases, but the circumference increases. This is how you get gain out of an antenna. The down side is that you reduce the radiated signal above and below the main signal.
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.