/
Matrix: How do I setup an Inhibit of a crosspoint that is set to Forced Listen in ECS V5.2 Local Advanced?

Matrix: How do I setup an Inhibit of a crosspoint that is set to Forced Listen in ECS V5.2 Local Advanced?

Apr 06, 2019

How do I setup an Inhibit of a crosspoint that is set to Forced Listen in ECS Local Advanced?
Answer: to disable the forced listen crosspoint which has been setup in the ECS(V5.2) >Local Advanced > Forced listen screen. You need to inhibit the crosspoint 
1)      Create  a Control2)      Create a Route, then select the Route and edit the ( Source Port    /   Action – INHIBIT TALK   / Destination Port )Set the action of the route to be INHIBIT talk Set the source and destination fields of the route to match the ports used to make the forced listen3)      Select the Control and then add or associate the Route to the control4)      Go to the panel programming screen and assign the Control to a panel key 

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.