Wireless: Freespeak II base2 Assignments Tab / Fixed Group

In FreeSpeak II Base2, audio routes can be made between beltpacks and external interfaces by putting members
into a fixed group.  A Group configuration enables an announcement or broadcast to a number of members simultaneously.
A group member can reply directly to the announcer using the Reply key. The other group members will not hear this.
To set up a Group you must first put the members in the Group. Ports, Beltpacks and the Base headset can all become
members of a Group. When the members of the Group are assigned, you must program a key to talk to the Group members.

In the screen shot above the fixed group "All" consists of the following members:

• 2-Wire port A

• 4-Wire port 1

• 4-Wire port 2

• Beltpack 1

• Beltpack 2

• Base Station Headset

The Fixed Group operates in the following manner, the caller can talk to all members, the members can only respond
back to the caller via their reply keys.