IP Products: What port options / baud rate settings are available on the LQ-4W2 interface?
Port Type
4-Wire Ports
These are analog balanced line level input and output signals on a single RJ-45 connector.
Port Options
To Matrix
LQ’s default port option
Allows connection to matrix frames
To Panel
Allows connection to 4-wire devices by switching the pin polarity
Baud Rate
9600 (Drake 4000)
Drake 4000 matrix frames
19200 (Eclipse)
ECS and Eclipse matrix frames
Other Settings
4W Port Label
Clicking on a blue label header will allow you to change the name of the port.
Enter the new name and either press the <ENTER> key or click the blue check mark to apply changes.
4W Port Input/Output Gain
-12 to +12 dB
Assignments Tab > Channels > Local Audio Mix
Network Quality | Transmit Audio Bitrate | Transmit Audio Bandwidth | Transmit Packet Size | Receive Jitter (min - max) | Receive Unit Latency |
|---|---|---|---|---|---|
Very Low | 16 Kbps | 12 kHz | 60 ms | 60 - 200 ms | 80 - 220 ms |
Low | 32 Kbps | 12 kHz | 40 ms | 40 - 100 ms | 60 - 120 ms |
Balanced | 48 Kbps | 12 kHz | 20 ms | 20 - 60 ms | 40 - 80 ms |
High | 64 Kbps | 12 kHz | 10 ms | 5 - 60 ms | 25 - 80 ms |
Very High | 128 Kbps | 20 kHz | 5 ms | 3 - 60 ms | 23 - 80 ms |
Custom | 12 - 128 Kbps | 12 / 20 kHz | 5 - 60 ms | All Above 100 - 500 ms 200 - 1000 ms | +20 ms to the above depending on selected Custom Receive Jitter value |
Note: LQ-4W2 devices are not Matrix +3 compatible (solution dated Nov 2015)
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.