Matrix: How do I see what TCP/ IP connections have been made to Eclipse Matrix
Is there a way to see the number of PC's that have connected to my Eclipse Matrix?
Yes, please see below for a event log based method to see the current connections on a matrix (CPU LAN port)
If you type a custom 63 request to a matrix it will output the current list of control and monitoring connections.
Here is how to setup the Event Log:Go to: EHX > Diagnostics > Event log > Live > Blue Arrow Play (hit play button) > Request Matrix Information > Custom > Message Code > Type 63 > Send
or select the RED highlighted option
In the output above we have two TCP connections to this matrix.
There are two blocks of output above.
1) Ethernet <UDP/TCP> <Remote IP Address>:<Remote Port><int 0/1>
There is one entry in this format for
a) a TCP connection
b) any remote IP device that has sent a UDP type request into the matrix.
UDP devices to not use connection type resources (they are connection-less), however certain unsolicited status updates will be sent to these devices on port UDP/42001.
If the TCP connection is an EHX or Dynam-EC connection it will state int 1 at the end of the line i.e. a 3rd part HCI connection would show up as int 0.
2) TCP Port <Local Port Number> rem <Remote IP Address> port <Remote Port Number> space <Payload Space Remaining on Socket>
This is a lower (stack) level output per TCP connection. Much of the information is duplicated from the block above.
Please note: if you believe you are having TCP/IP socket problems please send to clear-com tech support a save diagnostics file from the system. The type of information that we are interested in would be lost on a CPU card reset so please take the diagnostics file before any reset is made.
Please note: if you believe you are having TCP/IP socket problems please send to clear-com tech support a save diagnostics file from the system. The type of information that we are interested in would be lost on a CPU card reset so please take the diagnostics file before any reset is made.
From EHX V11 there is a new command that will allow you to reset the HCI connections and clear any IP buffers
Goto EHX > main menu > tools > matrix connection
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.
We are looking for your help! Please consider sharing your stories, update an old solution or help us with a new one. Follow this link to share!