/
Matrix: How do I change the input level or output level of a port form my V-series panel?

Matrix: How do I change the input level or output level of a port form my V-series panel?

Apr 06, 2019

Ihave set up an IFB and it works ok but I want a level control of the mix minus feed that is overkeyed from my panel 
Using  a dedicated key on the intercom panel
in ECS > panel programming
place the mix minus port onto a key
while in ECS > panel programming double click on the key representing themix minus and in the bottom right had corner of the panel programing screen youwill see a new area
(stacked key / key specific action)
select the key specific tab
you will see in the box a pull down that says crosspoint - change this to Inputlevel



































Now the small blue scroll up/down buttons will adjust the input level of the port.This will also work on V-rotary panels as the rotary encoder replaces the small blue scroll up/down buttons


CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.