Wireless: I want to convert the HS4-3 headset from a Din connector to a XLR-4 connector
I have a HS4-3 ear + label mic headset which is normally used by the DX range of wireless beltpacks like the BP210 however I want to convert it to a XLR4 connector.
I accept that this will void the warranty on the HS4-3 unit - and that the microphone on the HS4-3 is a electrect so should be used on a product that supports electrect mics
The wiring for the HS4-3 to 4-pin XLR is as follows:
Pin1 Red
Pin2 Red/Green
Pin3 Black
Pin4 White
Case Screen
*The screen isn’t necessary – it's used more for mechanical strength
Related content
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.