Digital Partyline: HelixNet PL: How do I wire up a footswitch to the HelixNet base logic inputs?
Question: How do I wire up the logic inputs on the HelixNet HMS-4x base station via the rear panel DB-25 connector to be activated via a remote panel switch or foot switch? How many logic inputs can I access on the base station?
Answer: The chart below will show the logic input 1, 2, 3 and 4 wiring to a panel switch or foot switch to rear panel DB-25F GPIO connector on the HMS-4x base station. Logic Inputs 1 thru 4 are programmable via the HMS-4x menu button / rotary controls associated with the LCD displays. Logic inputs can be assigned trigger any combination* of Headset*, Mic*, Call and Talk Keys with the latch configuration of the key in question.
Keep in mind that;
GPI input will flip the current state of a latched key.
If an absolute control is required by a GPI (GPI=On=Key=On) the controlled key(s) must be set to Non-Latching.
* as of version 4.2+
Note: This solution is also attached as a PDF document below. 
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.