Partyline: My Partyline System with a TWC-701 behaves oddly with a Studio Technologies Model 45/46/47 4-wire interface on the line
My Encore Party-line System with a TWC-701 behaves oddly with a Studio Technologies Model 45/46/47 4-wire interface on the line.
When using a Studio Technologies Model 45/46/47 4-wire interface connected to a Clear-Com TW party-line using the TWC-701/4 adaptor, make sure that the automatic Termination on the Studio Technologies Model 45/46/47 4-wire interface is DISABLED.
This is done by setting DIP switch #4 to ON.
When using a Studio Technologies Model 45/46/47 4-wire interface connected to a Clear-Com TW party-line using the TWC-701/4 adaptor, make sure that the automatic Termination on the Studio Technologies Model 45/46/47 4-wire interface is DISABLED.
This is done by setting DIP switch #4 to ON.
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.