/
Wireless: Are both channels of the DX210 available on it's 2-wire connections to connect to an RTS, or do you have to make a Y cable to get both channels on one XLR?

Wireless: Are both channels of the DX210 available on it's 2-wire connections to connect to an RTS, or do you have to make a Y cable to get both channels on one XLR?

Apr 06, 2019

In the back of the DX210 there is a button to change the XLR connections from a Clear-com format to a RTS format. In the RTS mode both channels coming from the RTS unit are then available on the base station via a single 3-pin XLR connection to IC1 or IC2.  Be sure to set the appropriate channel selection via the front panel IC controls. 
The BP210 belt pacs can select either channel to communicate with but not simultaneously. However the local headset user on the front of the base station will have the ability to talk to either or both channels simultaneously. There is therefore no need to use a Y cable.

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.