HelixNet: Can I connect a HelixNet digital powerline into legacy Party Line systems?



The Helixnet digital Power Line Modem (PLM) technology is not the same as the older, analog PL systems, so you CAN NOT connect the two systems together via the powerline connector on the rear of the Helixnet base station
You can connect a Helixnet basestation to a analog partyline system via one of the HelixNet modules.

 HelixNet Main Stations accept both two-wire and four-wire optional interface modules, offering  connectivity to virtually all common two-wire and four-wire audio systems

The HLI-2W2 Interface Module enables two-channels of Clear-Com or RTS intercom to transparently interface with digital HelixNet intercom channels.. Don't forget to properly null the channels attached to these modules and ensure there is a analogue partyline psu unit to power the HLI-2W2

The HLI-4W2 Interface Module provides an easy way to interface common four-wire audio paths such as matrix ports, cameras, sound desks and telephone hybrids with a HelixNet Main Station. Each of the two ports employ both transformer and electrical balancing to ensure incoming and outgoing audio paths are free of hum and noise.

 

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT


This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.