Partyline: Need help configuring system with TELEX SPS-2000A party line system
1. Set Telex SPS-2000A Party Line Power Supply to Clear Com Unbalanced mode by removing the lid of the system and changing the slide switch setting to the correct mode.
2. Attach a Y cable between the Telex SPS-2000A Ch1 port, then to the associated wired belt packs for that channel, and the other side of the Y cable to the Tempest system on Ch. A (or other channel).
3. Set Tempest slider switch on the front of the Tempest for your selected wired mode to be in Clear-Com mode. Not RTS or BAL.
4. Illuminate the CH. A LED with the SEL push button.
5. Illuminate the 2 Wire LED across from the illuminated CH. A LED using the second SEL push button.
4. Check that the Tempest system Echo Cancellation is engaged for CH A - Menu > Basestation Settings > Tech Menu > Echo Cancellation > Check mark next to your selected Channel. Hit the menu button several times to get back to the main menu.
5. In the Main Menu hit Wired Intercom Settings > Auto Null > Null Now
6. Once done YELL into the headset of one wirelessbelt pack a full count OUTLOUD of 1,2,3……10. Then wait about additional 10-20seconds this should help level out the system. Test between wired and wireless system to check for echo.
2. Attach a Y cable between the Telex SPS-2000A Ch1 port, then to the associated wired belt packs for that channel, and the other side of the Y cable to the Tempest system on Ch. A (or other channel).
3. Set Tempest slider switch on the front of the Tempest for your selected wired mode to be in Clear-Com mode. Not RTS or BAL.
4. Illuminate the CH. A LED with the SEL push button.
5. Illuminate the 2 Wire LED across from the illuminated CH. A LED using the second SEL push button.
4. Check that the Tempest system Echo Cancellation is engaged for CH A - Menu > Basestation Settings > Tech Menu > Echo Cancellation > Check mark next to your selected Channel. Hit the menu button several times to get back to the main menu.
5. In the Main Menu hit Wired Intercom Settings > Auto Null > Null Now
6. Once done YELL into the headset of one wirelessbelt pack a full count OUTLOUD of 1,2,3……10. Then wait about additional 10-20seconds this should help level out the system. Test between wired and wireless system to check for echo.
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.