/
Partyline: How to build an in-line mic switch for a headset mic.

Partyline: How to build an in-line mic switch for a headset mic.

Apr 06, 2019

Buy a toggle or PTT in-line switch, which will lift pin 2 of the 4-pin XLR to the intercom's headset jack, will allow them to leave the talk latched and turn their mics on and off with unmolested camera shots.This will only work with a dynamic microphone.  Do not allow phantom voltage to be sent to the headset jack from the camera head, panel or BP.See attached photo for an example.One could also short pins 1 to 2...or use a make before break switch.

  File Modified

JPEG File PL HS switch.jpg PL HS switch.jpg

Apr 06, 2019 by Administrator

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.