/
Wireless: What should I set the 2-wire/4-wire interface to when no wired IC is attached?

Wireless: What should I set the 2-wire/4-wire interface to when no wired IC is attached?

Apr 06, 2019

When using the Tempest 2400 2 channel or 4 channel base station as a standalone system (no external intercom is attached to the Tempest base station) the intercom interface on the Tempest base station should be set to NONE.  (off)
This disables the echo-cancellation software on the Tempest system.  If the base station is set to 2-wire mode the echo cancellation will attempt to perform echo cancellation and this can result in unwanted echo in the beltpack users headset. 
Note:  Also check that headset mic gain is not set too high as this can result in an acoustic echo from the mic back to the earpiece depending on the headset used.  Some headset types are more prone to this effect than others so test the beltpack in advance when using unknown or unfamiliar headsets with the beltpack. 

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.