Helixnet: How do I tie four 4-wire module camera CCU feeds to one Helixnet channel?

Question:  I'm using four camera CCU 4-wire feeds into a Helixnet base station that has 4-wire modules.  My goal is to combine all the camera feeds into one channel of the Helixnet base so that all the cameras can hear each other in a partyline.  Is this achievable using the Helixnet base station?
Answer:  The four camera feeds can be combined into one Helixnet channel.  This is accomplished by performing the following steps:
1.  Determine which channel the four 4-wire camera feeds are going to be present on
2.  Press the "MENU" button on the front panel of the Helixnet base station to access the menu settings
3.  On the leftmost scroll knob select "MODULE SETTINGS" on the OLED display so that it is highlighted
4.  On the 2nd leftmost scroll knob select the desired 4-wire module slot so that it is highlighted in the OLED display
5.  On the 3rd leftmost scroll knob select "CHANNEL ASSIGN" so that it is highlighted in the OLED display
6.  On the last scroll knob select the desired Helixnet channel so that the name is highlighted in the OLED display and press in the scroll knob so that shows that it is assigned to the Helixnet channel. 
Repeat steps 2 thru 6 for the remaining 4-wire module camera feeds until they are all assigned to the same Helixnet channel.