IP-Voice: How do I set up VoICE so I get Call Signal between two Party-line Systems linked over IP
How do I set up VoICE so I get Call Signal between two Party-line Systems linked over IP
The EF-701Ms should be set up with the two DIP switches on the back of unit set to the Down position.
Both EF-701Ms should be nulled correctly using the front Headset jack socket
The RJ45 connection on the EF-701Ms at each end should be connected via a standard CAT5 patch cable to the “Panel” port of each of the VoICE units.
In the Data set up of both of the VoICE units you need to set the Framing to “None” but leave the other settings as they are (8 data bits, 1 Stop Bit, Parity None, Flow Control None, Baud Rate 19200)
Both VoICE Units should be set to the same sample rate
Both the LEDs (green and Yellow) on both of the EF-701M units should be lit Steady (no flashing)
If you do not get reliable Call Signalling try powering down the EF-701Ms by disconnecting the Party line connection to each and then reconnect it. Also double check the settings listed above.
The EF-701Ms should be set up with the two DIP switches on the back of unit set to the Down position.
Both EF-701Ms should be nulled correctly using the front Headset jack socket
The RJ45 connection on the EF-701Ms at each end should be connected via a standard CAT5 patch cable to the “Panel” port of each of the VoICE units.
In the Data set up of both of the VoICE units you need to set the Framing to “None” but leave the other settings as they are (8 data bits, 1 Stop Bit, Parity None, Flow Control None, Baud Rate 19200)
Both VoICE Units should be set to the same sample rate
Both the LEDs (green and Yellow) on both of the EF-701M units should be lit Steady (no flashing)
If you do not get reliable Call Signalling try powering down the EF-701Ms by disconnecting the Party line connection to each and then reconnect it. Also double check the settings listed above.
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.