/
Wireless: What are the charging specifications on CellCom 5-bay and single brick chargers?

Wireless: What are the charging specifications on CellCom 5-bay and single brick chargers?

By Administrator
Apr 06, 2019
5-bay charger:Output voltage +12Vdc at 2.5A(red led) fast charging current – 800mA(green led) trickle charge – 50mAafter 4 hours the red led should should extinguish and the green LED should light. This indicates that fast charging is over and trickle charging has commenced

Brick charger single beltpack:Output voltage +24Vdc at 2.1A(red led on beltpack) indicates beltpack is charging (red led off beltpack) indicates beltpack is finished charging and is now in trickle charge modecomplete charging takes place in 3 to 4 hours depending on the state of the rechargeable cells when charging startsBatteries should not be left in a beltpack and connected to a charger for more than 20 hours.
We recommend replacing batteries every 6 to 8 months / 500 charging cycles. 
We ship new product with PANASONIC P6P 2500mAH / 2600mAH Ni-MH 1.2V AA batteries

Related content

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.