Partyline: How do I place an AB-120 into announcer mode?

ANNOUNCER MODEL LATCHING MICROPHONE

Place a jump jack on pins 2 and 3 of JP11. In this mode, the microphone on/off button is latching in action and talk-back is momentary in action.

The red LED next to the on/off button is lit whenever the microphone output is active.Pressing the on/off button toggles the state of the mic from on to off, or vice versa, each time the button is pressed.

Looking for labels? They can now be found in the details panel on the floating action bar.

Related content

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.