Wireless: What is the function of Tempest Basestation "Master Mode"?
When no hardwired 2-wire PL system is present, Tempest uses a feature called Master Mode to power and terminate this circuitry. Audio will not be shared among the BaseStations until one of the linked BaseStations is set to Master Mode. Master Mode only functions when there is no 2-Wire hardwired intercom system connected. If there is a hardwired intercom connected to any channel of any of the shared Tempest BaseStations, Master Mode will automatically disengage and only channels connected to the hardwired intercom system will continue to be shared. The 2-Wire Intercom Type Select Switch on the Tempest BaseStation front panel must be set to “ClearCom” for Master Mode to function. Using the 3-PIN XLR male or female connectors on the back of the BaseStation, connect the intercom channels of each BaseStation that will share audio. Set any one of the BaseStations to Master Mode “On.” It is only necessary to set one BaseStation to Master Mode.
Master Mode settings are found at the “Set Base as Master” screen under the “Multi -Base Settings” of the Main Menu. Once one BaseStation is in Master Mode, audio will be shared among all BaseStations that are connected to that intercom channel. Lines must be nulled for proper operation.