/
Partyline: What are the accessory jack pinouts for a Kenwood TK-3301 to a TW-47 interface?

Partyline: What are the accessory jack pinouts for a Kenwood TK-3301 to a TW-47 interface?

Apr 06, 2019

Question:  I'm looking for the custom cable wiring to use a Kenwood TK-3301 portable 2-way radioon the 9-pin DB connector of a Clear-com TW-47.  Do you have any information about this?
Answer:  The TK-3301 radio uses 3.5mm and 2.5mm set of phone plugs to connect out to a remote speaker / mic.  See the diagram below for the pin outs to the radio.  To trigger the transmit function on the radio setup the VOX transmit function or incorporate the PTT function on the TW-47.  The pin outs and dip-switch settings for the TW-47 can be found in the TW-47 manual:  http://www.clearcom.com/userfiles/file/User%20Manuals/Partyline/Clear-Com_TW-40_Manual.pdf

Kenwood 2-pin wiring pin-outs



















CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.