What is the protocol PTP profile to be used to synchronize the IPT to IPA for EHX v11 and EHX v12 and what are the differences?
By Ibi Ali
1 min
The differences between the two profiles are listed in the latest AOIP recommendation document AES67 Requirements and Recommendations
See page 13 section 3.3.3.
At EHX V11.1 by Default Clear-Com uses the AES67 Media Profile.
At EHX V12 you can select to use the AES67 Media Profile or the ST2110 ( == SMPTE 2059-2) Profile.
Related content
Clear-Com: E-IPA TO IPT / IRIS PANEL BASIC LAYER 3 ROUTING
Clear-Com: E-IPA TO IPT / IRIS PANEL BASIC LAYER 3 ROUTING
More like this
Do Clear-Com IPT transceivers work with PTP Sync interval of -2 setting
Do Clear-Com IPT transceivers work with PTP Sync interval of -2 setting
More like this
Clear-Com: Recommended E-IPA Card Configuration Options
Clear-Com: Recommended E-IPA Card Configuration Options
More like this
EHX PTP Iris Panel (AES67) and Mentor RG
EHX PTP Iris Panel (AES67) and Mentor RG
More like this
Artel Quarra 1G / 10G AES67 PTP Setup Guide (Transparent Clock)
Artel Quarra 1G / 10G AES67 PTP Setup Guide (Transparent Clock)
More like this
Basic principles of Clear-Com products use of PTP / AES
Basic principles of Clear-Com products use of PTP / AES
Read with this
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.