OnSIP Cloud Extension

How to connect your LQ to OnSIP cloud extension provider.

Instructions

The following directions were pulled from the OnSip website FAQ.

Link: https://support.onsip.com/hc/en-us/articles/360004553271-Clear-Com

The information below is based on the LQ-Series (specifically LQ-R4W8) version 4.0.51.5 (bootmode FUSE)hw:2-2

Step 1: Gather information for each user

Each user has a set of credentials that will be needed to configure each device. For each device that you are configuring, obtain the following:

"SIP Address" (Address of Record)
"SIP Password"
"Auth Username"
"Username"
"Domain"
"Outbound Proxy"

You can find this information in the OnSIP Admin Portal, "User" tab, click on User's name the device will be configured to expand boxes, "Phone Configuration" box:

Step 2: Log into your device through a web browser

The default login is admin/admin

Step 3: Enter your user information from Step 1

SIP Server Settings:
Label -> Whatever you'd like
Registrar/Proxy IP / Hostname ->outbound proxy
Registrar/Proxy Port ->5060
Domain -> Domain

Advanced:
SIP Transport Protocol -> UDP/TCP
SIP Transport Port -> 5060

Accounts:
Label -> Whatever You'd Like
User -> username#authusername - you must have the hashtag (#) between the two with no spaces
Password -> SIP Password

Step 4: Confirm that your device is registered

In the Admin Portal, click on the "Users" tab. You will see a green "online" notation next to each user with a registered device.

Assistance outside of registering the device to OnSIP should be directed to the manufacturer.

Updated: June 2020