Can I use the FSII SPL splitter via CWDM mux
- ernie addow
- Ibi Ali
Does Clear-Com have experience with FSII Base to FSII SPL Splitter using Fibre over 3rd Party devices like Yellow Brik ( CWDM ) Multiplexer
example: FSII Base II (Fibre) <<Yellow Brick CWDM Mux>> FSII SPL-fibre
Answer:
You cannot use standard CWDM devices , as the Fibre signal is CC Proprietary, hence if the CWDM device decodes / encodes during the CDWM process it may not work
Some customers have done what you are asking for by using the aux channel on our Broman Mux-22 products as they don’t decode but mix the light
The type of connection for the FSII fibre is 1310nm / data format = CC Proprietary
Visit the Clear-Com website for more details on the Broaman Mux-22 video / audio device
for additional information on CWDM please see General guidelines of CWDM :
Related content
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.